Breathable 2-component slurry for interior and exterior use.
Avoids the phenomenon of surfaces "weeping" when the temperature changes, as well as the flaking of conventional paints. Economical and high-coverage, this system is specially designed for damp walls and cellars, as well as concrete block or highly porous surfaces.

Batirust finition S.N. is an anti-rust primer, intermediate coat and top coat for interior and exterior use to protect ferrous metals. This means you can create an anti-rust system with a single product.
It is applied to rust-free and degreased surfaces.

Hydrochim E is designed for waterproofing surfaces on façades, residential buildings and premises for collective or industrial use. On exteriors: it prevents penetration by cracks and micro-cracks in rustic rendering, chimney flashings, terraces and window sills. It treats all soiling caused by atmospheric dust, sludge, carbon monoxide, smoke, etc. It significantly slows the formation of micro-vegetation on vertical and, to a lesser extent, horizontal surfaces.

Micro-emulsion of silane-siloxane resins in an aqueous phase. This product is designed to permanently block rising damp in walls. Environmentally friendly, formulated without ecotoxic agents. Dries quickly on all neutral or alkaline substrates. Odourless and non-toxic, this product is ideal for treating occupied homes.

Hydrochim S is designed for waterproofing surfaces on façades, residential buildings and premises for collective or industrial use.
Externally: it prevents penetration by cracks and micro-cracks in rustic render, chimney flashings, terraces, acroteria and window sills. It treats all soiling caused by atmospheric dust, sludge, carbon monoxide, smoke, etc. It significantly slows the formation of micro-vegetation on vertical and, to a lesser extent, horizontal surfaces.

Prochipox is a two-component, self-smoothing, pourable epoxy resin.
It can be applied to fill cracks, dents or any other roughness on a horizontal surface.
It can also be applied to various flat surfaces (worktops, tables, floors, etc.) to protect them. The resin is transparent (gloss finish) but can be tinted in various colours.

Satin lacquer for protecting wood and metal (on rust- and grease-removed surfaces) for interior and exterior use, especially for window frames.
3 in 1 paint For use as a primer, intermediate and finish. Specially developed product on a modified alkyd base, giving it specific advantages such as: better resistance over time, flexibility maintained even after ageing, better resistance to flaking, less soiling, better resistance to yellowing, very good permeability to water vapour.

Water-based, scratch-resistant polyurethane acrylic lacquer for interior use. (Matt appearance)
Suitable for finishing all interior woodwork (doors, skirting boards, window frames, etc.)
Can also be used on other substrates such as metal or plastic, provided a suitable primer has been applied.

Apply in 2 coats to a clean, dry base.
A first coat of Prolac Primer is essential on doubtful or bare substrates.

Solvent-based satin lacquer for all interior decoration work. It is characterised by its perfect tightness and highly decorative "eggshell" appearance. Its structure allows thick coats to be applied without the risk of dripping. Its urethane alkyd-based composition makes it highly resistant to abrasion.

Colourless, water-based, polyurethane resin-based matt varnish for interiors.
Suitable for protecting all interior woodwork. (Can be dyed in a range of wood types)
Can also be used as an additional protection on all acrylic paints.
Apply in 1 or 2 coats to sanded, clean, dry surfaces.

Single-component, solvent-based, satin-finish, alkyd-urethane floor paint for interiors.

Solvent-based plastic lacquer for protecting and restoring fibre cement cladding (e.g. Eternit). A flexible paint based on thermoplastic acrylic resins. It is flexible and waterproof. It provides good resistance to chemicals, basic or acidic solutions and mineral salts. Its exceptional adhesion slows the return of moss and lichen.

Solvent-based satin-finish stain with UV filter (colourless or woodstain according to colour chart). For interior or exterior use. Homogeneous satin finish allowing 3 coats to be applied. The finish is waxed and the woodstain is supple. The film thickness is high to ensure above-average durability. It is based on silicone-modified alkyd, making it more resistant to dirt.

Aqueous-based, extra-matte paint for ceilings, based on acrylic resin. High coverage (usually covers in 1 coat), easy application and long open time. Extra matt, even in low-angled light.
Apply 1 or 2 coats to dry, clean surfaces. On doubtful, powdery or bare substrates, a first coat of primer or a second coat of paint can be applied.
of fixative is essential. (e.g. Wallcryl Primer, Wallfix E, Fix-O-Cryl, etc.).

Decorative paint that can be written on with chalk (school chalkboard effect) and washed off with clear water. Apply to interior walls or woodwork.

Velvety, water-based acrylic paint for interior use.
Can be applied to all sound wall surfaces such as ceilings, gyproc, concrete, bricks, etc.
Washable 100% paint.

Apply 1 or 2 coats to dry, clean surfaces. On doubtful, powdery or bare bases, a first coat of primer or fixative is essential. (e.g. Wallcryl Primer, Wallfix E, Fix-O-Cryl, etc.).

Aqueous-phase siloxane resin-based paint with a matt mineral appearance similar to lime, for exterior and interior use.
Can be applied to all sound wall surfaces such as concrete, brick, cement, plaster, gyproc, etc.
A highly breathable, vapour-permeable paint, ideal for old buildings whose walls are regularly exposed to damp. Greatly delays the effects of blistering and peeling.

Apply in 1 or 2 coats to dry, clean surfaces. The first coat can be diluted with 10% of water for better penetration into the substrate.

Aqueous-based matt saturator designed to protect and enhance exterior woodwork such as decking, cladding and flooring. Highly penetrating and non-film-forming, it does not flake and is easy to maintain. Its hydro-permeating effect limits clogging, while its UV filter preserves the colour of the wood. Easy to apply in two coats on dry wood, it gives a natural matt finish that enhances the grain while letting the wood breathe.