Breathable 2-component slurry for interior and exterior use.
Avoids the phenomenon of surfaces "weeping" when the temperature changes, as well as the flaking of conventional paints. Economical and high-coverage, this system is specially designed for damp walls and cellars, as well as concrete block or highly porous surfaces.

Batirust finition S.N. is an anti-rust primer, intermediate coat and top coat for interior and exterior use to protect ferrous metals. This means you can create an anti-rust system with a single product.
It is applied to rust-free and degreased surfaces.

Hydrochim E is designed for waterproofing surfaces on façades, residential buildings and premises for collective or industrial use. On exteriors: it prevents penetration by cracks and micro-cracks in rustic rendering, chimney flashings, terraces and window sills. It treats all soiling caused by atmospheric dust, sludge, carbon monoxide, smoke, etc. It significantly slows the formation of micro-vegetation on vertical and, to a lesser extent, horizontal surfaces.

Micro-emulsion of silane-siloxane resins in an aqueous phase. This product is designed to permanently block rising damp in walls. Environmentally friendly, formulated without ecotoxic agents. Dries quickly on all neutral or alkaline substrates. Odourless and non-toxic, this product is ideal for treating occupied homes.

Hydrochim S is designed for waterproofing surfaces on façades, residential buildings and premises for collective or industrial use.
Externally: it prevents penetration by cracks and micro-cracks in rustic render, chimney flashings, terraces, acroteria and window sills. It treats all soiling caused by atmospheric dust, sludge, carbon monoxide, smoke, etc. It significantly slows the formation of micro-vegetation on vertical and, to a lesser extent, horizontal surfaces.

Satin lacquer for protecting wood and metal (on rust- and grease-removed surfaces) for interior and exterior use, especially for window frames.
3 in 1 paint For use as a primer, intermediate and finish. Specially developed product on a modified alkyd base, giving it specific advantages such as: better resistance over time, flexibility maintained even after ageing, better resistance to flaking, less soiling, better resistance to yellowing, very good permeability to water vapour.

Solvent-based plastic lacquer for protecting and restoring fibre cement cladding (e.g. Eternit). A flexible paint based on thermoplastic acrylic resins. It is flexible and waterproof. It provides good resistance to chemicals, basic or acidic solutions and mineral salts. Its exceptional adhesion slows the return of moss and lichen.

Solvent-based satin-finish stain with UV filter (colourless or woodstain according to colour chart). For interior or exterior use. Homogeneous satin finish allowing 3 coats to be applied. The finish is waxed and the woodstain is supple. The film thickness is high to ensure above-average durability. It is based on silicone-modified alkyd, making it more resistant to dirt.

Aqueous-phase siloxane resin-based paint with a matt mineral appearance similar to lime, for exterior and interior use.
Can be applied to all sound wall surfaces such as concrete, brick, cement, plaster, gyproc, etc.
A highly breathable, vapour-permeable paint, ideal for old buildings whose walls are regularly exposed to damp. Greatly delays the effects of blistering and peeling.

Apply in 1 or 2 coats to dry, clean surfaces. The first coat can be diluted with 10% of water for better penetration into the substrate.

Aqueous-based matt saturator designed to protect and enhance exterior woodwork such as decking, cladding and flooring. Highly penetrating and non-film-forming, it does not flake and is easy to maintain. Its hydro-permeating effect limits clogging, while its UV filter preserves the colour of the wood. Easy to apply in two coats on dry wood, it gives a natural matt finish that enhances the grain while letting the wood breathe.